Categories
Home Improvement Lifestyle

How to Lower or Raise Water Hardness in a Spa Shop Sydney?

Among the many spa maintenance tasks that we do, understanding how to reduce water hardness in spa shop sydney is one of the most important.  Allowing the water hardness or calcium level in your pool spa equipment to become too high or too low could be detrimental to the water’s chemistry balance. 

There are even instances that it can harm or induce a damaging effect on your pool equipment and its various components. For this reason, it is of paramount importance that you know exactly how to maintain proper balance in this aspect and be very good at it.  

hotel and resort

What is Calcium in Relation to Your Pool Equipment? 

We have a straightforward answer to this — your pool equipment contains water. Remember that calcium is an element and that it naturally occurs in all bodies of water. This would include rivers to creeks, up to the oceans. 

Even the tap water that flows out of our household faucet has calcium in it since it originally comes from the big bodies of water like streams, rivers, aquifers, and the earth.

Calcium and magnesium are minerals that can be found in both of those sources. Over time, they get to the bodies of water and thus get dissolved along the way. 

These dissolved minerals in the water itself cause the water to become “hard.” But you can make your water softener or you can also make it harder compared to water in other areas, depending on where you’re from. 

If you are not certain as to the hardness of the water coming out of the faucet in your own home, you can purchase a water hardness test kit for this purpose. 

Is the Hardness of Water and the Hardness of Calcium the Same Thing?

For this, we are going to give you another direct answer. Water hardness and calcium hardness are terms that can be interchanged with one another. Therefore, they are the same banana. But there is one new term that we need to get familiar with first: absolute hardness.

What is Total Hardness?

When you say complete hardness, you are referring to the concentration of magnesium and calcium that has been dissolved in water. 

You may ask, Why is this important? To be sure, there are water test strips and kits that can measure not just calcium hardness but even its complete hardness, too. 

While it is not a big deal, you can determine exactly just how much magnesium and calcium make up your Australian plunge pool water has. There is no need to do this though, it is enough to balance your pool water calcium levels with respect to its total hardness.

Too Much Calcium 

If you reside in a place where the use of hard water is not considered something unusual, then you know what scaling is all about. You have seen that on your faucets. You’ve probably noticed it accumulating on your kitchen tiles and sink. There is no exemption to that because even your shower head is not spared by scaling due to hard water.

spa wellness

This goes to show that if your pool equipment water calcium level gets too high, your pool equipment is going to be covered with scales. It will be too visible in the filter, and you will likely see some formations also in various crannies and nooks.

Do you know what is scarier here, and perhaps even more dangerous is the scaling that is not seen by the naked eyes, or those that are hidden from sight itself. If that happens, the repercussions would manifest in the form of damage to your pool equipment filter system. 

Too Little Calcium 

If calcium levels are too low, it will run the risk of inducing premature corrosion to your pool equipment and its parts. This includes the heating element of the heater itself, the jets, and significant sections of the pool shell (in the case of hot tubs).

If you are using water for your pool equipment that is too “soft”, it can become a bane to your water, causing it to produce the so-called “hot tub foam”. It is pretty obvious to see that it is indeed a double whammy thing. 

Conclusion

To experience the benefits of using only the optimum quality for your Australian plunge pool water, see to it that you have a calcium range of 175 to 250 ppm (parts per million).

This is also relevant for complete hardness. Provided that your pool water chemistry will stay within that ideal range, your pool equipment water should be fine and suitable for every household member’s swimming pleasure. 

Categories
Home Improvement

How to Give Your Pool Spa with Australian Spa Parts a Balanced pH Level?

There is one common denominator among pool spa owners. They want their homes to have this one special corner dedicated to pure, sheer relaxation after a hard day at home or work. They want to unwind, they want to relax – they want to kick back. 

However, things are not always smooth sailing when you own a pool spa. If you are unwilling to learn anything about its proper upkeep or maintenance, problems are likely to come to the surface anytime soon. 

Usually, issues on pool spa or hot tubs would be stemming from unstable pH levels. Alongside this also, when total alkalinity levels are screwed up — it will eventually drive you mad. 

Many pool spa owners are under the impression that they are constantly chasing their pool’s chemical levels up and down with the local test strips they are using. Most of the time, due to lack of expertise, luck seems not to be on their side because they always fail to hit right in the middle – a sweet spot that is their primary target. 

If the pool water’s pH reading is way too low when compared to the accepted normal levels, there is a need for you to find out a way how to raise it. There are proven effective ways to do this, right before scale deposits and cloudiness starts to dominate your pool spa down.

Why Balance in pH Level is Important? 

To fully understand why this is so important here, we’ll need to go back to what high school chemistry taught us about acids and bases. Back then, we learned that a solution (basically a chemical that you mix with some water) has in them some extra hydrogen ions, which makes them acidic. But if the solution comes with fewer hydrogen ions as opposed to plain water, that qualifies it as basic. 

Now with respect to the general pH scale, neutral water is a perfect 7. The liquid that registers a pH level lower than 7 makes them more acidic, going higher though means they are more basic. 

If I will test my pool spa water using commercial-grade test strips that I can obtain from a spa shop near me, they will tell me how basic or how acidic my pool spa water is. Ideally, its pH level should measure anywhere between 7.4 to 7.6. 

If the pH measure will go beyond that range, it only means to say that you may be in for something that is potentially damaging to your Australian spa parts. Worse, it could also be detrimental to your health.  

pool steps

What’s a Low pH Level Mean for a Swim Spa?  

If your pool spa/hot tub water registers a pH level of 7.4, this could mean trouble for you. As indicated above, low pH means that the water is more acidic. Pool spa water that is highly acidic will render your pool water sanitizer to weaken and thus become less effective than it already is. 

When this happens, anyone who takes a dip to your pool spa will be exposed to contaminants that are likely harmful to them.  

When your pool spa water pH level is low, it increases your risk of being exposed to bacteria such as legionella. This is the type of bacteria responsible for Legionnaire’s disease and many more. Besides, it can also induce premature corrosion of parts and components of your pool or hot tub.  

What’s a Low pH Level Mean for a Swim Spa?  

A pH level of 7.6 and above indicates that your pool spa water is more basic. This means to say that you have poorly sanitized water. Besides that, it makes the water very prone to flaky scale build-up and this usually manifests on various spa surfaces.  

Categories
Health Home Improvement

Why the Coronavirus Can’t Live in Water at a Swim Spa for Sale?

Water plays a big part in our day to day existence. We drink water, we also cook and prepare our food with water. We wash our hands with it, clean the house, and we give our dogs a bath using water.

We also bathe ourselves with water, and most of us love to swim in a pool of water on a muggy afternoon, right? Simply put, water plays a significant role in almost everything in our life. Hence, it is safe to say that we live in it.

The next time that you turn on your tap at home, you may be wondering if the novel Coronavirus can survive in water, too. The countless number of people from around the globe are asking the same question, too.

hot tub relaxation

The Environmental Protection Agency (EPA), together with the Centers for Disease Control and Prevention or CDC, gave their official statement about this impression of the general public. According to their spokesperson, scientific experiments show no evidence that the spread of the new novel corona virus is even likely to occur in the public water supply. This can be attributed to the sanitation efforts done on water treatment facilities where tap water comes from.

But things took a 360 degree turn when it comes to the untreated wastewater. Experts found out that the corona virus can thrive there, although it remains indeterminate up until now how long the virus could survive in it.

Wastewater must be treated properly to exterminate unwanted germs, including viruses. Fortunately, the CDC confirms that there has been no reported case of COVID-19 infection that resulted from too much exposure to untreated wastewater.

Even though most people won’t have any business to come into contact with sewage water, here are some of the important things we ought to learn first about COVID-19 in relation to water, that is — the water that we have at home, in a swim spa for sale, pool or hot tub, as well as rivers, lakes, and oceans.

Tap Water is Safe

In light of the COVID-19 scare, the US CDC gave the public the much-needed assurance that the public water treatment systems they have in place, which includes chlorination and filtration, are sufficient and powerful enough to eradicate the new coronavirus.

In addition, it is such a relief to know also that the EPA made a confirmation recently that they don’t think that the new coronavirus would have a chance of even infecting the public drinking water. Evidence shows that there is a very low possibility that we’d contract the virus from the public water supply.  

If you happen to have your own private well in your backyard, we suggest that you take into account the use of a certified home treatment device. Usually, this would come in the form of a water softener, filtration system, disinfectants, and distillation. Any of these measures will significantly help in eliminating bacteria and viruses, and included here is this new strain of the novel coronavirus.

Swim Spa for Sale Use is Safe

Provided that your swim spa or hot tub is properly maintained, it should follow that it is safe to use and free from novel coronavirus. When it comes to proper maintenance of your water entertainment facility, this translates to regular checks and adjustments of the pool water pH and chlorine levels.

For whatever it’s worth, the CDC made it clear that there is no solid reason to believe that COVID-19 can be spread through a pool or hot tub water. While community pools as well as water parks and playgrounds open and slowly resume their operations, make sure that you always maintain proper social distancing from everyone around – regardless if you are in the water or at the poolside.