Categories
Home Improvement

How to Give Your Pool Spa with Australian Spa Parts a Balanced pH Level?

There is one common denominator among pool spa owners. They want their homes to have this one special corner dedicated to pure, sheer relaxation after a hard day at home or work. They want to unwind, they want to relax – they want to kick back. 

However, things are not always smooth sailing when you own a pool spa. If you are unwilling to learn anything about its proper upkeep or maintenance, problems are likely to come to the surface anytime soon. 

Usually, issues on pool spa or hot tubs would be stemming from unstable pH levels. Alongside this also, when total alkalinity levels are screwed up — it will eventually drive you mad. 

Many pool spa owners are under the impression that they are constantly chasing their pool’s chemical levels up and down with the local test strips they are using. Most of the time, due to lack of expertise, luck seems not to be on their side because they always fail to hit right in the middle – a sweet spot that is their primary target. 

If the pool water’s pH reading is way too low when compared to the accepted normal levels, there is a need for you to find out a way how to raise it. There are proven effective ways to do this, right before scale deposits and cloudiness starts to dominate your pool spa down.

Why Balance in pH Level is Important? 

To fully understand why this is so important here, we’ll need to go back to what high school chemistry taught us about acids and bases. Back then, we learned that a solution (basically a chemical that you mix with some water) has in them some extra hydrogen ions, which makes them acidic. But if the solution comes with fewer hydrogen ions as opposed to plain water, that qualifies it as basic. 

Now with respect to the general pH scale, neutral water is a perfect 7. The liquid that registers a pH level lower than 7 makes them more acidic, going higher though means they are more basic. 

If I will test my pool spa water using commercial-grade test strips that I can obtain from a spa shop near me, they will tell me how basic or how acidic my pool spa water is. Ideally, its pH level should measure anywhere between 7.4 to 7.6. 

If the pH measure will go beyond that range, it only means to say that you may be in for something that is potentially damaging to your Australian spa parts. Worse, it could also be detrimental to your health.  

pool steps

What’s a Low pH Level Mean for a Swim Spa?  

If your pool spa/hot tub water registers a pH level of 7.4, this could mean trouble for you. As indicated above, low pH means that the water is more acidic. Pool spa water that is highly acidic will render your pool water sanitizer to weaken and thus become less effective than it already is. 

When this happens, anyone who takes a dip to your pool spa will be exposed to contaminants that are likely harmful to them.  

When your pool spa water pH level is low, it increases your risk of being exposed to bacteria such as legionella. This is the type of bacteria responsible for Legionnaire’s disease and many more. Besides, it can also induce premature corrosion of parts and components of your pool or hot tub.  

What’s a Low pH Level Mean for a Swim Spa?  

A pH level of 7.6 and above indicates that your pool spa water is more basic. This means to say that you have poorly sanitized water. Besides that, it makes the water very prone to flaky scale build-up and this usually manifests on various spa surfaces.