Categories
Industrial Engineering

What are the Common Telltale Symptoms of Fuel Contamination in Silvan Tanks?

Much like any other containment system for high-value liquids, silvan tanks, without proper care and maintenance, are prone to fuel contamination, too. Liquid fuel contamination — we define this as a presence of foreign matter that should not be there. 

This issue accounts for a wide array of the fuel-related concerns we have today. If this occurs, fuel quality is likely to degrade soon enough and produce inappropriate things, for example asphaltenes. Under pretty normal conditions, they are not supposed to be there but are now contaminating your liquid fuel.  

With the burgeoning of wrong information hounding this issue on contamination of liquid fuel, we figured that it might be a good idea to come up with a “down and dirty” compilation of the most common symptoms that can pave the way for it.

In resolving any kind of fuel-related problem, the first two critical steps would be to recognize what the problem really is and to correctly identify its underlying causes. After this, the drafting of a proper solution can be carried out and eventually implemented.  

While these “symptoms” may well indicate the presence of something inappropriate in your high-value liquid, when it is about knowing exactly the underlying reasons behind a particular symptom, there may be possible multiple root causes.  

White, Black or Blue Smoke 

Smoke is usually comprised of petroleum particles that have remained uncombusted. Smoke is not likely to become a byproduct of a properly-functioning engine that can efficiently and completely burn liquid fuel. 

Take smoke as a good indicator. Its presence may well indicate that your fuel may contain something that is not supposed to be there, provided of course that your engine is in proper working order. 

To identify exactly what that is may necessitate you to do more than just a little detective work. But the usual culprits are the heavier petroleum compounds. They may be fuel heavy ends, asphaltenes, sludge or even lube oil — normally they don’t burn easily and cleanly the way fresh fuel will.  

Off-Color Appearance or “Smelly” Fuel in your Silvan Tanks

You know that you have fresh gasoline or diesel by their sheer appearance, clear and bright. Another thing is that they also have this characteristic “solvent” smell in them. If the fuel is harboring entrained water, it is likely going to give it a cloudy appearance. 

The darkened appearance of your liquid fuel indicates that it is likely unstable already. Take it as a clue that it might be in the process of producing heavy ends and asphaltenes. Or if your liquid fuel is giving off an odd smell, it is an indication of microbes in the liquid fuel. This usually occurs when the tank does have in it significant amounts of water. 

fuel tanks contaminant

Engine Shuts Down or Runs Rough 

If your engine would eventually shut down on its own, without any apparent reason behind it, or would run rough like it never did before, take it as an indication that there might be some kind of foreign matter in your tank. 

Since we are dealing here with contaminants, we are going to preclude an issue such as the diesel fuel’s inadequate cetane rating. But in terms of contaminants, you would not want to take water or heavy end substances out of the equation, most especially in a marine or gas engine. 

It is also a good practice to keep an eye on your filter because there is a good chance that contaminants have found their way in there and is restricting the flow of your filter. If that happens, your engine’s performance will get compromised because it will not run properly. 

Categories
Home Improvement

Styling a House for Sale and Not Feel Sorry About It

Styling a house for sale is most of the time easier said than done. It can be a very intimidating job to some of us, especially to those who do not have any relevant background or experience on this. 

What if I tell you that you have the power to transform your house and make it look bigger than it is, sans any costly add-on? Would you believe that even a simple coat of paint has the power to transform a lifeless and gray outdated space and turn it into a haven which property hunters and buyers would have a keen interest to make it their own? 

Styling a house for sale is a form of art and requires imagination and skills. Its main purpose is to present your home in the best light, and showcase what its best features are and make it the key selling point. 

In the absence of relevant experience in this area, enlisting the help and services of a professional home stager, who happens to have a perfect understanding of how the current market is doing nowadays, will be of great help. Such professionals can even give you a hand in maximizing the individual rooms of your house. 

If you happen to come across a very talented home stager, he’d not have a hard time transforming a cozy nook so that it can become and feel downright spacious. 

Say Goodbye to Clutter and Hello to Storage

If there are items in your house that you have not used in years, you may consider giving it away. To someone who is going to make good use of it. Whether these would be items in your attic, pantry, closet, basement or kitchen cabinets, the best thing to do is move whatever extra you have in there and then streamline whatever you decide to still keep. It works to your advantage if you will know how to overwhelm your potential buyers positively in terms of the simplicity of your home’s inner space. Veer away from having a hodgepodge of clutter. 

What you need to show to a potential home buyer is the space they can have in your home, and 

you need to make a conscious effort to showcase it, including closets. If you choose to have your stuff during the home staging process, make it sure that you leave your closets one-third empty. 

If you happen to have a sundry of out-of-season apparel, you may want to decide to store them elsewhere for now. It is important to have your closet doors remain open, this way you are giving your potential buyers a sneak peek to how much of a valuable space they could have.  

Never Make an Assumption That Buyers Won’t Take a Look “There”  

Normally, home sellers think that potential buyers won’t have the slightest interest in looking at spots they skimped on getting done. For instance, you have a junk drawer that has not been cleared up for years. When trying to put up your home onto the property market, anticipate that homebuyers are likely to look and inspect at every single door and drawer, closets and cabinets. Remind yourself that there will be no off-limits for them. The house itself is still your property, but these buyers are probing every corner if they too would be interested in making it their own soon.  

Keep Your Pets Away for Now

pet cat on a couch

It is okay to have your pets around, you may consider them as your family member. But keep in mind that they are your family. So don’t assume that your prospective buyer would be very appreciative to have them around. There is no way to tell. 

Even if you are so used to the smell of their fur and you don’t take it against them when they have mounds of fur everywhere, the sheer sight of a snowball could be more than enough to make your home’s winning impression dissipate into oblivion.  

Fix What’s Underfoot

If your floor carpet is having that unpleasant grubby appearance, it may be high time that you have them steam cleaned first. This will help in getting rid of any odor and long-seated dirt and grime would be removed, too. 

In the case of the carpet system that is completely beyond repair, what can you do about it? If there is no possible way you can make it look decent, your next best course of action to take is to replace it. Look for a plush carpet that you think will be perfect to take the place of the frayed one you have. You can also perk up your potential buyer’s interest by replacing badly damaged carpet with hardwood floors.

Categories
Industrial Engineering

How to Properly Maintain Your CNC Plasma Kits Australia Machines?

One may think or qualify maintenance of CNC plasma kits Australia as some kind of a boring chore when compared to the aspects of running and keeping a successful machine fabrication shop. Proper maintenance or the upkeep for these machines is of prime importance not only because of the repair costs but more importantly due to the possibility of losing great amounts of profit if their equipment will be shut for some needed some repairs.

Preventive Maintenance Plan

If you want your CNC plasma kits Australian tools running smoothly and will help in keeping your business raking in more profits, it is paramount to have a preventive maintenance plan in place. This will be comprised of routine check-ups for your pieces of equipment to help in boosting up their efficiencies. It will also help increase their uptimes and in doing so will significantly enhance your expectable profit margins.

Are you not convinced yet? Here is something worth pondering on. CNC cutting machines, in the sheer absence of a good maintenance plan, are likely to experience unplanned breakdowns and this occurring may cost you 5 times more compared to annual PMPs. Between the wasted, unproductive hours and expedited part shipment, a solid PMP program in place will win for your business affordable machine maintenance.

Daily Care Routine for Your CNC Cutting Machines

  • Set a convenient time to inspect your hydraulic pressure and see to it that it is set at 4.5 MPa. 
  • Verify that your machine’s hydraulic fluids are on the right operating level. 
  • Verify if your chuck pressure is set to the right operating pressure as per manufacturer instruction.
  • See to it that your lube level is at the correct operating level and to replenish it as necessary.  
  • CNC cutting machines equipped with its cooling system must be set at the right operating level all the time.  
  • Make it a habit to clear the chips from the chip pan. 
  • Make it sure that you clean your machine’s window door and light, this way you can see what is inside.

Every week or right after the lapse of 40 hours or so, make it sure to take off your CNC control cabinet. Regular cleaning of this area is paramount to have proper ventilation and ease out cooling.  

Every 3 Months

After every 500 hours of use, make sure that you check out the chip conveyor chain and grease it as necessary. Also, don’t skimp on checking and cleaning out the filters on the coolant tank.

Every 6 Months

After every six months, doing the math we’ll see this is equivalent to 1000 hours, after the lapse of this period you may need to reach out to your local distributor and have them perform the following preventive maintenance measures on your CNC cutting machines:

  • Clean the coolant tank and clear it from chips, sludge, and oil. 
  • Dismantle the chuck and jaws from your CNC cutting tool to have it cleaned. 
  • Drain the hydraulic tank and change your hydraulic oil with a new one. 
  • Clean the radiator and see to it that your machine radiator fins are straight. 
  • Drain and clean your lubrication unit before you put on fresh lube to it. 
  • Have your machine leveling checked and make proper adjustments as necessary.  
  • Check also your wipers and inspect for any damage, replacing them as necessary.  
Plasmacam Australia

Once a Year

After every 2,000 hours of usage of CNC plasmacam Australia machines, which is roughly after a year, once every year reach out to your local distributor and have him inspect the following:

  • Check out the headstock and look for any tapers
  • Check out your machine spindles and inspect for radial or end play.
  • Inspect your chuck cylinder and check it for run out. 
  • Check your tailstock for any taper presence.
  • Have your machine’s inclination and turret parallelism inspected. 

Then finally, make it sure that your distributor will perform a backlash program. By this measure, they’d be able to see if the backlash in the X and Z axis are in proper order. Otherwise, make proper adjustments as necessary.

Categories
Lifestyle

Surprising Health Issues You Can Treat with Hydrotherapy According to a Spa Shop Sydney Center

Anyone who works in one of the few spa shop Sydney centers will tell you that the benefits of a swim spa go beyond swimming, relaxation, and exercise right in the comfort of your own home.

Did you know that people from the ancient past were also plagued by several health issues that we have today? Yet they were able to surmount these health challenges because they have uncovered the secret restorative and sanative properties of water.

Regardless of what age bracket you are in, hydrotherapy can be of substantial help in managing some of your specific health conditions. Ultimately, it will help you experience improved overall wellbeing and health.

According to leading spa shop Sydney centers, this is how the healing properties of water will help your body recover and rehabilitate from aches and pains.

Fibromyalgia and Arthritis

The medical community qualifies fibromyalgia and arthritis as rheumatic conditions simply because they involved the soft tissues or the joints, inducing chronic pain to the individual. One of the most effective ways to manage this level of physical pain is by identifying ways to relax and soothe the tendons, muscles, and joints.

Did you know that warm water in an outdoor swim spa can help minimize both muscle stiffness and stress? Due to the weightlessness of the human body in water, pressure on your joints is taken out of the picture. Hence, the pain goes away, too.

Outdoor swim spas are equipped with varying speed settings and this allows users to experience different levels of success here. Whether you are a strong athlete or frailest of the patients, the warm waters of a swim spa can support or challenge a user.

Therefore, consider reaching out to a pool and spa warehouse offering swim spas that are equipped with settings for the current speed. The more settings that your prospective outdoor water entertainment feature has, the greater the possibility that you can customize it to your specific needs.

Parkinson’s Disease

There are many instances that traditional physical therapy routines are not enough when it comes to managing Parkinson’s disease. This condition involves the nervous system’s progressive disorder.

If you are not aware yet, hydrotherapy, which is one of the manifolds of health-promoting benefits of swim spas, is fast becoming a popular rehabilitation method in the majority of physical therapy clinics in the country. Regular use of your swim spa, accompanied by recommended hydrotherapy routines recommended by a physical therapist, can significantly help in alleviating symptoms of Parkinson’s disease.

The warm tub of water in your swim spa will serve as your full-body support. Hence, rendering it easier for you to achieve your balance as you perform your routine hydrotherapy exercise. The warmth of the water will help in loosening your joints and muscles while the variable current you chose to have will you complete simple to intense workouts.

blue lagoon hydrotherapy

Rehabilitation and Recovery

Nowadays, there is an observable increasing popularity on the use of hydrotherapy for the treatment of on-going medical conditions and injuries. Everyone who has a dire need for it can enjoy the health-promoting benefits of warm swim spa water for rehabilitation and recovery.

Regardless if you are trying to recuperate from knee surgery, recovering from a muscle injury, or chronic arthritis, water hydrotherapy will always prove itself as an incredibly high-impacting therapy too.

Categories
Lifestyle

Suggested Diet While Taking Up TRT Treatment

Even when you are under testosterone replacement therapy, you still need to keep a watchful eye on your diet. This is one way you can ensure that your TRT therapy will deliver your best expectations.

In a man’s life, part of his growing older is the need to contend with the progressive reduction of testosterone in his system. The gradual reduction of testosterone in the male human body can come with a few negative impacts.

Lowered amount of testosterone in the body not only entails difficult with concentration, energy, and mood, it may also bring about issues on sexual stimulation and muscle growth. To most men afflicted by this condition, it can hurt the quality of their life making us qualify it as a serious problem.

It is such a relief to know that there are available treatments for this health concern and help a man’s body boost his testosterone levels again, by virtue of TRT treatment. Sometimes, TRT prescription alone may not be good enough. You must live a healthy lifestyle and observe good eating habits, too.

  1. Red Meat

If you are slated for a TRT replacement program soon, you need to know as early as know that consumption of red meat such as veal, beef, lamb, and pork are some of the absolute best foods to boost your T-levels.

They are high in protein. Thus, they will help your body in building muscles and facilitate the production of a testosterone hormone referred to as glucagon. This signifies that eating more red meat will translate to more testosterone created by your body.

  1. Bananas

Often, we think that fruits may not offer substantial help in as far as TRT hormone replacement program is concerned. But things are different in the case of bananas. This humble fruit is high in testosterone-inducing nutrients, vitamins, and enzymes including bromelain, vitamin B and potassium. This explains the reason why low-T patients must see to it they have this fruit in their diet because it will help their body increase its testosterone production.

  1. Beans

If you are going to partake in a testosterone replacement Sydney program, you might want to incorporate the consumption of bean-based meals into your diet. Much like red meat, beans naturally are having high concentrations of zinc and protein. 

In the case of white beans, the zinc they contain can be easily absorbed by the male body. This would foster faster and seamless testosterone production in the male testes.

String Beans
  1. Eggs

Is there any other better way to start your day right than by having a plate of sunny-side-up eggs? Or perhaps, scrambled eggs will do it for you instead. If you are on testosterone replacement therapy program, consuming eggs will help increase your body’s production of testosterone. 

Eggs are rich in B5 and B6 vitamins. They also have high amounts of protein, which helps in promoting muscle growth. Aside from which, eggs can boost your energy levels as well as your libido, too.  

  1. Oysters

If eating raw oysters is not up to your alley, you should reconsider consuming them from now onwards because they are great for boosting your testosterone growth. Oyster is one type of seafood that is filled with zinc, a vital element in the body’s production of testosterone. Besides, it is also teeming with protein.

If you eat oysters, they will not only help in augmenting your sperm count but will also help a lot in enhancing your libido.  

Are you a likely candidate for a TRT treatment?

Loss of interest in sex decreased libido, fatigue, lethargy, are some of the most common symptoms of low T-levels. If your body is showing the aforementioned indicating symptoms, it is highly recommended that you reach out to a licensed TRT doctor near you and request an appointment.

You would only be given a TRT prescription after confirmatory tests were carried out by your attending physician and found out that your body is suffering from low testosterone. Reaching out to a medical professional for this purpose is the only way you can validate your suspicions.

Categories
Industrial Engineering Technology

How is a Water Jet Cutting Machine Different from Laser Cutting?

It is surprising to know that many people today are still unaware of how efficient water jet cutting machines are. The working idea behind this popular material cutting method was inspired by how a waterfall wears away rock formations at the bottom of a deep ravine. Only that it is done in warp speeds, and executed with greater emphasis on precision.

The Power of Water Jet Cutting Machine

To further intensify the cutting power of a waterjet cutter, the pressurized water used for these cutting machines can be mixed with abrasive particles. Typically used for this purpose are aluminum oxide and garnets.

As for the cutting force of water jet cutting machine, it can reach a maximum power of 60,000 psi. This explains the reason why this material cutting method is most recommended and preferred for projects that involve cutting of thicker material objects where the use of laser cutting method may not be very feasible at all, or would just run the risk of giving poor quality cut.

Some of the most common reasons why a significant number of metal fabrication centers in the country are shifting or patronizing the use of waterjet machines are due to the following: 

It can be used when working on thicker materials, including patterns that come with large tolerances.

They are trying to veer away from heat interference due to laser transferring its heat to the materials being cut. At high risk here are patterns that are so close to each other.

Waterjet cutting allows your metals to lay flat throughout the entire cutting process. In the laser cutting method, there are instances that you need to know how to put them at the right level.

Their team is involved or deals with an array of different materials. Waterjets earned a good reputation in cutting through stone, ceramic, steel, reflective metals, and many others.  

Laser Cutting

Laser cutting machines are in high demand these days, even from the very first day they were introduced to the market and we attribute this to their high level of precision. They also gained wide acceptance among various industries because they cut your materials fast.

But if there is one major setback you can complain about this method of cutting, it is the fact that you are limited to cutting only ⅝ of thickness. Beyond this level of thickness, it is hard to maintain an exceptional quality of cut.

Today’s software applications allow you to send a CAD file to the laser computer. After which you can begin cutting materials for your project within seconds. Many fabrication shops in the country are employing this method to help address their prototyping needs.

Laser cutting machines come with a stackable material tower which makes them ideal for big production runs. Many companies execute long, overnight cutting runs. They also leave these cutting machines unattended. 

Major Differences of Water Jet Cutting Machine and Laser Cutter Devices

Laser Cutting VS Water Jet

Infrared Light and gas laserEnergy and SourceWater and high-pressure pump
8 x (4 -20’) x 6.5’Standard Table Size8 x (4-13’) x 6.5’
Sheet MetalCommon Cut MaterialsStone, ceramics, thick metal
0.31” to 0.4”0.06”Economical ThicknessMinimum Hole Size0.250” to 2”0.02”
0.002”Tolerance0.008
Categories
Lifestyle

The Importance of Coating for Your Non Slip Tiles

Floors are definitely an important part of buildings, whether it’s commercial or residential. They are not just there for walking, but they also greatly affect the exterior and interior of the building. For example, many people are now choosing non slip tiles over other types of materials. This is because aside from making the floors safe, these tiles also enhance the look of a place.

Just like with other types of tiles, these too need to be cleaned and maintained properly. Failure to do so will lead them to decrease their lifespan and lose their value. However, there are times when cleaning is not enough even if you do it regularly. For such type of tiles, to maintain it’s protective and anti-slip capability, treatments and coatings are needed.

Among the most popular and easiest treatment is the application of non-slip coatings. It is important to find the best coating to use on your floor. Below are some benefits of applying coatings and treatments.

Coatings and Treatments for Non Slip Tiles

Prevention of Accidents

As we all know, slip and fall accidents are very common. They can happen anywhere and as much as possible, we have to avoid them as they can lead to injuries. This is also the reason why you need to consider the use of coatings on your floor to avoid such unfortunate things from happening. After all, you would never want to have a broken leg or arm or have others experience these things.

Avoid Slip & Fall Accident

In the workplace, slip and fall accidents happen. But things could get more serious and complicated. When clients, customers, or employees encounter these accidents in the workplace premises which resulted from a slippery floor, this could mean an expensive lawsuit. You and your company could get dragged in court and will have to cover for the medical expenses of the victims, in addition to the compensation for damages incurred. But all these can be avoided by using a good quality floor coating that will allow everyone to walk freely and safely.

Increase the Floor’s Lifespan

Unless you have a plan of having a major renovation, you will not be considering changing the floor surface. Floor replacement could take a lot of money and effort. But with the use of non slip coatings, you could make your floor look good as new, not to mention that it will be safer to walk on. Given this added layer, the floor is protected, especially in areas that have heavy foot traffic. As a result, the floor’s lifespan greatly increases.If you have encountered a slip and fall accident in the home or office, then necessary measures should be taken so it won’t happen again, and no one will be a victim. If you are not sure with the best floor coating and treatments to use to make the floor safer, it would be best to talk to professionals that specialize in such things. Visit this link to know the advantages of installing an anti-slip tile in the home or office.